Customization: | Available |
---|---|
After-sales Service: | You Can Apply for a Refund up to 30 Days After Rec |
Connection: | Welding |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Size | 1/2"---72" |
Wall thickness | Sch10-Sch160 |
Standard | ANSI B16.9,MSS SP 43, DIN2615, EN10253, GOST17376, JIS B2313, MSS SP 75, etc. |
Material | ASTM A234,SS304/L,SS316/L,SS321/H,ASTM WP5,WP9,WP11,
A420WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH, P235GH, P265GH, P280GH,P295GH,P355GH and etc. |
Surface | Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE... |
Price Term | FOB, CIF, CFR |
Payment | T/T 30% in advance, the balance before shipment;100% LC |
Packaging | Plastic film,wooden cases, wooden pallet |
Delivery | 20-30 days, after received advance payment. |
Application | Petrochemical industry;aviation and aerospace industry;pharmaceutical industry; gas exhaust; power plant; shipbuilding;water treatment,etc. |
All Dimensions are in mm | |||
NOMINAL PIPE SIZE | OUTSIDE DIAMETER | CENTER TO END | LENGTH |
Inch. | OD | C | M |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 29 | 29 |
1 | 33.4 | 38 | 38 |
1 1/4 | 42.2 | 48 | 48 |
1 1/2 | 48.3 | 57 | 57 |
2 | 60.3 | 64 | 64 |
2 1/2 | 73 | 76 | 76 |
3 | 88.9 | 86 | 86 |
3 1/2 | 101.6 | 95 | 95 |
4 | 114.3 | 105 | 105 |
5 | 141.3 | 124 | 124 |
6 | 168.3 | 143 | 143 |
8 | 219.1 | 178 | 178 |
10 | 273.1 | 216 | 216 |
12 | 323.9 | 254 | 254 |
14 | 355.6 | 279 | 279 |
16 | 406.4 | 305 | 305 |
18 | 457.2 | 343 | 343 |
20 | 508 | 381 | 381 |
22 | 559 | 419 | 419 |
24 | 610 | 432 | 432 |
26 | 660 | 495 | 495 |
28 | 711 | 521 | 521 |
30 | 762 | 559 | 559 |
32 | 813 | 597 | 597 |
34 | 864 | 635 | 635 |
36 | 914 | 673 | 673 |
38 | 965 | 711 | 711 |
40 | 1016 | 749 | 749 |
42 | 1067 | 762 | 711 |
44 | 1118 | 813 | 762 |
46 | 1168 | 851 | 800 |
48 | 1219 | 889 | 838 |
NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | REDUCERS | CAPS |
NPS | O.D. at Bevel (1), (2) | I.D. at End | Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
(1), (3), (4) | |||||||||
½ to 2½ | 0.06 | 0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
-0.03 | |||||||||
3 to 3 ½ | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 | |
4 | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 | |
5 to 8 | 0.09 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 | |
-0.06 | |||||||||
10 to 18 | 0.16 | 0.12 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 | |
-0.12 | |||||||||
20 to 24 | 0.25 | 0.19 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 | |
-0.19 | |||||||||
26 to 30 | 0.25 | 0.19 | 0.12 | … | … | … | 0.19 | 0.38 | |
-0.19 | |||||||||
32 to 48 | 0.25 | 0.19 | 0.19 | … | … | … | 0.19 | 0.38 | |
-0.19 |